To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a Process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a Process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on Process mapping and process visualisation resulted in a method for Process mapping. The study showed that research on process visualisation is neither structured nor well defined.

Bactiguard is a Swedish company within the field of medichal technology. The company has been very prosperous since it was founded in 2005 and was electedÅrets MedTechföretag 2008 ?MedTech Company of the year 2008. According to a definition by NUTEK, Bactiguard is still considered a minor company ? despite high market value and international expansion.

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

We have produced a Process mapping and from there developed a document management plan for the research service at the Labour Movement Archives and Library (ARAB) in Stockholm, Sweden. The project was conducted during five weeks in the spring of 2011 at ARAB and the resulting classification structure and document plan has been formulated and presented to the staff at a seminar. We found that the institution in some cases were suffering from an inadequate documentation in a number of the identified processes, and also in their records management and archiving. In this additional memorandum follows an analyzing discussion of activity-based document- and archive management, e-archives and Process mapping. We have accordingly tried to standardize the process of research services and contribute to a more adequate document management within the institution.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

Denna rapport jämför tre stycken texturmappningsalgoritmer vars uppgift är att öka detaljrikedomen på ytor utan att tillföra några extra polygoner. Algoritmerna är tre stycken pixel-shaders vars uppgift är att skapa illusionen av tre dimensioner istället för två på de ytor algoritmerna är applicerad på. Ytor med få polygoner ska se ut att bestå utav många fler.Fyra expriment har utförts på tre, till formen mycket olika, 3D-modeller tillsammans med tre olika texturuppsättningar berstående utav färg-, normal- och höjdtextur.Resultatet visar att alla tre tekniker har olika starka och svaga sidor och på så vis sina optimala användningsområden..

Today's industries are constantly evolving and the demands according to quality for products and services produced and performed are becoming more and higher. ISO 9001 is a standard that serves as a tool for organizations who wants to effectively control and manage their quality workforce on business different processes. A background to the introduction of a quality managementsystem towards Skärås svets och mekaniska in Västerås are that more and more customers demand this from a company to enable it to obtain an order of production.Efforts to introduce a quality system such as ISO 9001-2008 all begin with to carry out a situationanalysis of the business. Skärås svets och mekaniska currently has no existing quality management system so therefore there is no current directives regarding who is responsible, for a future certification in the business.By structuring a situation analysis of the business. You get a good overview of the business and how it is conducted today.

Volvo Penta has been producing boat engines since 1907 and are world leading in this seg­ment. They have today an extended range and also sell industrial power stations. Quality, safe­ty and environmental care are three core values for Volvo and together they strive to give their customers the right product with the right quality.Volvo has developed a production system named Volvo Production System, VPS, and one of the pillars is continuous improvements. Within this pillar you can find value stream map­ping, which is used to analyze the value stream through the process. This tool gives a wide perspective and helps to keep focus on the entire process instead of just parts of it.Volvo Penta in Vara has earlier done value stream mapping but without good results since they didn?t take set-up times and imbalances in account.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

Kontext: Displacement Mapping är en teknik som används inom 3D-spel för att skapa detaljrikedom i geometri utan att behöva triangelobjekt bestående av oönskad geometrikomplexitet. Tekniken har även andra användningsområden i 3D-spel, till exempel terränggeometri. Tekniken skänker detaljrikedom genom att i samband med tesselering förskjuta geometri i en normalriktning eller längs annan specificerad riktning. Vector Displacement Mapping är en teknik liknande Displacement Mapping där skillnaden är att Vector Displacement Mapping förskjuter geometri i tre dimensioner. Mål: Syftet med arbetet är utforska Vector Displacement Mapping i sammanhanget 3D-Spel och att antyda att tekniken kan användas i 3D-spel likt Displacement Mapping.

Kontext: Displacement Mapping är en teknik som används inom 3D-spel för att skapa detaljrikedom i geometri utan att behöva triangelobjekt bestående av oönskad geometrikomplexitet. Tekniken har även andra användningsområden i 3D-spel, till exempel terränggeometri. Tekniken skänker detaljrikedom genom att i samband med tesselering förskjuta geometri i en normalriktning eller längs annan specificerad riktning. Vector Displacement Mapping är en teknik liknande Displacement Mapping där skillnaden är att Vector Displacement Mapping förskjuter geometri i tre dimensioner. Mål: Syftet med arbetet är utforska Vector Displacement Mapping i sammanhanget 3D-Spel och att antyda att tekniken kan användas i 3D-spel likt Displacement Mapping. Arbetet jämför Vector Displacement Mapping med Displacement Mapping för att urskilja skillnader i exekveringstid mellan teknikernas centrala skillnader.

This report is about how HDR (HighDynamicRange) can be created and used in combination with Tone mapping. This work has been carried out together with Kapsch TrafficCom AB in Jönköping.The objective of this project is to:Evaluate and investigate the effects given to pictures by HDR and tone mapping.Evaluate if the technology may lead to improvements in Kapsch?s systems.To construct a program which is able to handle some form of tone mapping or HDR-algorithm.These questions will be answered in this report:What kind of effects has HDR and tone mapping-algorithms on pictures?Can the HDR-technology give better data in Kapsch?s systems?The research method used in this report is called action research. This means the authors has investigated the technology by reading different documentations and by testing different algorithms to see what kind of result they give. The report describes some of the tests made to see if the technology is appropriate in Kapsch?s system.There is two smaller reports made by the authors which documenting some of the work.The first report describes the work with different settings for a camera to create pictures with HDR-quality.

This thesis work is intended to analyze whether the municipalities has a need for the new technology of mobile mapping.Mobile mapping consists of the technologies of laser scanning, photographing and positioning of streets and roads in city environment and in the countryside. When these technologies are operating together a georeferenced three-dimensional image model is created, which has specific coordinates that states its position on the surface of the earth. Thanks to the laser scanning process even measuring can be performed in this model.The municipal sector consists of many different departments which use visual spatial information. These departments are an interesting target group for this system. Specific departments within the municipal sector, which we considered were the most suitable, have been selected.

This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.